Fuente de alimentación Bitmain Antminer APW7 PSU 1800W para Bitcoin Miner S9 V9 T9 S7 L3 D3.
Bitmain Antminer APW7 PSU 1800W Power Supply for Bitcoin Miner Z9 mini S9 V9 T9 S7 L3
Overview:
1. The power cord is not included, please find one with at least 10A from your local market.
2. The APW7 can deliver a maximum power of only 1000W if it is connected to a 110V mains power supply. To obtain the rated power of 1800W, the APW7 must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
3. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer.
Specifications:
Output
| DC Voltage
| 12.0V
|
Rated Current(220V input)
| 150A
|
Rated Power (220V input)
| 1800W
|
Rated Current(110V input)
| 83.3A
|
Rated Power (110V input)
| 1000W
|
Ripple & Noise
| <1%
|
Voltage Accuracy
| 12.0-12.5V
|
Source Regulation
| <1%
|
Load Regulation
| <1%
|
Setup, Rise Time
| <2S
|
Power off Protection Trip Time
| >10mS
|
Input
| Voltage Range
| 100-264V AC
|
Frequency Range
| 47-63Hz
|
Power Factor
| >0.99(full load)
|
Leakage Current
| <1.5mA ( 220V 50Hz )
|
Protection
| Low-voltage Input
| 80-89V AC
|
Output Short Circuit
| Yes
|
Output Overcurrent
| 150-200A
|
Overheat Protection
| Yes
|
Environment
| Operating Temperature
| -20-60 ℃
|
Operating Humidity
| 20%-90%RH ( non-‐condensing )
|
Altitude
| < 2000m
|
Structure
| Dimensions
| 206*110*62mm
|
Weight
| 2.0kg
|
| Cooling Mode
| force-‐air cooling
|
| Noise
| 43DB
|
|
Package includes:
1 x APW7 PSU (Power cord is not included)