LSV Cables      

Welcome to LSV-Cables!

• FeedBack
• MAILING LIST
• fAVORITES

• Home
• About us
• our Products
• PaymentS
• Shipping
• returns
• Contact Us

PRODUCT DESCRIPTION

VAN DAMME Hi-Fi Series LC-OFC 2 x 6mm TOTAL DEFINITION DIRECTIONAL HI-FI Audio Speaker Cables Terminated 8x Sigma plugs (A Pair for 2 speakers)

Available in optional or custom length.

• Cables are high pressure crimped of professional electric crimping tool Hex Gun (for maximum contact surface area).

• Terminated High Quality 8x 24-Gold-Plated Pure Red Copper Airloc SIGMA Banana 4mm spring loaded plugs at the both end.

• The ends finished with colour coded Red & Black and marked (gold arrows) directional branded heat shrink sleeves.

NOTE: The cables are directional so prior to connecting, make sure that the arrows run from the amplifier to the speakers terminals.

AIRLOC a solder-free, airtight perfect fusion between the two metals of cable and plug. This ‘cold weld’ method allows the cable and plug to offer the optimum signal transfer and therefore, better sound quality. It also reduces contact resistance and ensures perfect long-term performance.

Do not hesitate and Try perfect matching VDC Hi-Fi Speaker Jumper Cables Bi-Wire Link please search ebay item number: 124829288616 or visit our ebay shop.

REGARDING SIGMA PLUGS:

We are proud with our new product and we believe it will improve the sound quality of any audio system.We offer designed to fit the 4mm amplifier and speaker terminal socket found on most high end audio separators such as Arcam, Linn, Quad and Naim amplifiers, these 4mm plugs are constructed from a gold plated red copper connector and the cable termination is by CRIMPING.This plugs is available in three different sizes and fits 2.8mm, 3.4mm and 4mm diameter cable and requires crimping with a heavy duty crimping tool to ensure consistently high levels of performance and connectivity regardless of the conductor cross-section, which has a very important effect on the transmission of a smooth signal and very low resistance unlike mostly available Brass plugs.The spring loaded pin section of the plug allows for optimal connection to the speaker or amplifier terminal socket.

We use professional electric and manual high quality crimping tools to terminated audio cables and we offer the possibility of terminating our products with these plugs.If you want to terminate your cables yourself you will need a crimping tool or you can contact your local Hi-Fi supplier.

Materials such as audio cables and its connections are a very important link in the entire Hi-Fi audio chain, which is why we decided to introduce new plugs, which are made of red copper and their surface is covered with gold, so that the signal flows clearly and without obstacles on the way.

We know metals such as brass or alloy are very contaminated so we want to explain it simply.

For example: a tube filled with hair restricts the flow of water more than a clean tube of the same shape and size.Likewise, electrons can flow freely and easily through a copper wire, but cannot flow so easily through a steel or brass wire of the same shape and size. The difference between copper and brass is related to their microscopic structure and electron configuration and is quantified by the property called resistivity.

Conductivity refers to the ability of a material to transfer energy. There are different types of conductivity, including electrical, thermal and acoustic conductivity. The most electrically conductive element is pure silver, followed by very close are copper and gold. Silver also has the highest thermal conductivity of all elements and the highest light reflectance.While it is the best conductor, copper and gold are more commonly used in electrical applications because copper is less expensive and gold has a much higher corrosion resistance.As silver tarnishes, it is less desirable at high frequencies as the outer surface becomes less conductive.

Brass has six times weaker conductivity than copper.

Brass oxides they are hard and highly contaminated, strongly adhering and act as an effective insulator, while copper oxides are softer and conductive. Therefore, connections and terminations of copper wires are almost the best conductor of electricity, unfortunately most of the available plugs on the market are made of brass.

Why did we name our plugs Sigma? because electrical conductivity is measured in Siemens per meter (S / m) and is commonly denoted by the Greek letter σ (Sigma).

What Van Damme say:

This range comprises 5 conductor sizes of shotgun speaker cable. These cables can be found in many professional environments, in particular the 4.00 mm² and 6.00 mm² speaker cables are used for critical near field monitoring in many world class recording and mastering studios. It is also the speaker cable of choice for more than one high end hi-fi equipment manufacturer.

This hi-fi speaker cable is designed for high-end hi-fi systems and for critical studio monitoring applications where transparency of signal transmission is paramount. Indeed, this cable is specified by more than one “world class” hi-fi equipment manufacturer and is used in many world class recording and mastering studios. The cable comprises of ultra fine 0.1mm conductors with 7-way plait construction to minimise the skin effect and to keep the cable remarkably flexible, given it’s size.

If you would like diferent CONDUCTOR SIZE please visit our ebay shop. 

 

Wire cross section (wire diameter)   Contrary to appearances, this is an important factor, because it depends not only on the volume of the sound, but also on the acceptable power output.So if is the thicker conductor wire then the lower its resistance and the greater the current strength. On the other hand, do not overdo it with its diameter. For example, using a large section cable in a small set of computer speakers is pointless, because the benefits will be very small, and even none. The sale of speaker cables is available in 4 cross-sections: 1.5 mm2 - 2.5 mm2 - 4.0 mm2 - 6.0 mm2

 

 

The length of the wire.

As for the length of the speaker cables, the rule is: the shorter the better. The excess of the cable unnecessarily increases its resistance, the more so that the resistance in the cable counts double: from the amplifier to the loudspeaker and back. Thus, every meter more 2-wire cable is like 2 meters more in its entire length. For the same reason, it is important to remember that the length of the cable is the same in both channels (left and right), both in the stereo system and the home theater. In home cinema systems, the front speaker cables are usually shorter than to the rear speakers, but it is important that the speakers of each pair (front or rear) are powered with a cable of the same length. Theoretically, there is no upper limit when it comes to the length of the speaker wire, but they are the sizes recommended by specialists depending on the impedance (the smaller the impedance, the greater the current flows in the cable, so it must be shorter). Here they are for copper wires:

 

 

FEATURES AND BENEFITS: Van Damme   cables are used in many professional systems and critical near field monitoring in recording and mastering studios worldwide. Van Damme is the industry standard in sound production, television, film and radio studios as well as live broadcasts and music performances.    Van Damme Hi-Fi Series 268-506-000  6.00mm or 268-504-000  4.00mm conductors ideally suited for medium/long runs of low impedance speaker signals.    

Van Damme Hi-Fi Series Speaker Cable caters not only for the Hi-Fi Systems but can be use for a recording studio environment and also for the rehearsal studio, live and presentation markets.

 

The Hi-Fi Series Speaker Cable works particularly well for systems that are naturally bright sounding or a little forward sounding. The cable equally works well with most systems, due to its solid dynamic range.

 

The large copper conductors produce a pristine sound with deep bass, clear top end and a solid mid range, with absolute accuracy to the point of making you feel involved in the music/film.

 

Van Damme Hi-Fi Series Speaker Cable caters not only for the Hi-Fi Systems  and Home Cinema Systems  but also for the studio recording environment. What better way to listen to your music, than using the cable that was used to record your media.By using a thicker cable, you increase the dynamic range, and add detail and resolution to the sound you are carrying.

 

SPECIFICATION:

• Conductor: 7 plaits of 3x 37x 0.1mm bare ultra pure linear crystal oxygen free copper

• Insulation: Clear PVC

• Conductor resistance: 3.30 ohm/Km

• Screen: 93% optical coverage LC-OFC braid

• Overall diameter: 16mm x 6mm

• Weight: 200Kg/Km

• High end domestic hi-fi cables

• Professional critical monitoring

Van Damme Speaker Cable Available in 1.5mm, 2.5mm, 4.0mm and 6.0mm Conductor Size.

 

Also Available:  

• Van Damme Blue & Black Series Speakers Cable 2x 2.50mm, 2x 4.0mm, 2x 6.0mm 4x 4.0mm and Hi-Fi  Series LC-OFC

• Van Damme Subwoofer cable for REL & BK

• Van Damme Bi-Wire Link (Speaker Jumper Cable)

• Van Damme Shotgun Audio Twin Interconnects  

Please Visit Our Ebay Shop or Lucasoundvision website.

• We offer standard Sales Units / Lengths: 100m reels or custom length; With connectors mounted to specifications: any length or without connectors Jacket Colours Available: Red and Black or Transparent.

• We can offer different combination Spade connectors and 24Gold-Plated BFA Z-Type 4mm plugs (Compatible with Arcam – Linn – Cyrus and all other good quality audio products).

 

We are an authorised VDC Cables dealership, so you can be assured of new and genuine products, covered by a full manufacturers warranty.

• 100% High quality • Fully tested • Warranty of quality • We send all item/s within 1-2 days

 

Please Visit Our Ebay Shop or Lucasoundvision website.

If you would like a different combination of spade connectors and banana plugs, or different cable lengths, please feel free to contact with us.

Please have a look at our other items, Any questions please contact with us.Thanks for looking.

Safe & Secure Payments by:

Join Us Today!

Subscribe to our newsletter for latest products, promotions and updates.

SIGN ME UP

Fast Delivery

Get Fast and Reliable Delivery Worldwide

• Home
• About us
• our Products
• PaymentS
• Shipping
• returns
• Contact Us

Copyright © 2018. LSV-Cables. All Rights Reserved.

• Condition: Nuevo
• Length:: 2x 1m
• Kabellänge: Optional
• Produktart: Lautsprecherkabel (Single-Wire)
• Besonderheiten: Geschirmtes Audiokabel
• Connection Split/Duplication: 1:1
• MPN: 268-506-000
• Maßeinheit: Einheit
• Fibre Type: Multi-Strand
• Colour: Clear
• Gauge: 9 AWG
• Herstellernummer: 268-506-000
• Unit Type: Unit
• Manufacturer Warranty: 2 Years
• Anschluss Splitter/Doppler: 1:1
• Fasertyp: Multi-Strand
• Anschluss A: Banana Männlich
• Cable Length: Optional
• Features: Shielded Audio Cable
• Anschluss B: Banana Männlich
• Unit Quantity: 2
• Compatible Brand: Universal
• Kabelquerschnittsfläche: 9 AWG
• Markenkompatibilität: Universell
• Compatible Model: 4mm Speaker Terminal
• Herstellergarantie: 2 Jahre
• Brand: Van Damme
• Type: Speaker Cable (Single-Wire)
• Marke: Van Damme
• Farbe: Transparent
• Herstellungsland und -region: Großbritannien
• Modellkompatibilität: Universal
• Connector B: 4mm Sigma Banana Plugs
• Connector A: 4mm Sigma Banana Plugs
• Ausgangsspannung: 1.5 V
• Country/Region of Manufacture: United Kingdom
• Output Voltage: micro voltage
• Anzahl der Einheiten: 2

Ver Más