Placa módulo de expansión escudo WiFi ESP-13 ESP8266 sever web serie 802.11 b/g/n

EUR 14,64 ¡Cómpralo ya!, EUR 2,23 Envío, 30-Día Devoluciones, Garantía al cliente de eBay
Vendedor: worldchips ✉️ (189.653) 99.1%, Ubicación del artículo: ShenZhen, CN, Realiza envíos a: WORLDWIDE y muchos otros países, Número de artículo: 325786926945 Placa módulo de expansión escudo WiFi ESP-13 ESP8266 sever web serie 802.11 b/g/n.

Product Feature:
1. WiFi uses industrial-grade chip ESP8266, the module is ESP-13 with a metal shield, strong anti-interference ability;
2. The standard pins are compatible with main control boards such as Arduino Uno and Mega2560. The voltage conversion chip is used to connect Arduino and UNO, which makes 3.3V and 5V compatible;
3. The serial port is controlled by a two-way DIP switch, so that the expansion board can be used as an Arduino Uno expansion board alone or as an ESP8266 expansion board;
4. Real serial WiFi, Arduino program does not need any configuration;
5. Configure WiFi parameters and serial port parameters based on Web Server;
6. It can be used as an independent ESP8266 development board to download official AT command firmware, NodeMCU open source firmware, etc.;
7. It can be used as a stand-alone Arduino Uno expansion board, all the pins are led out.   The main parameters:
1. Support wireless 802.11 b/g/n standards;
2. Support STA/AP two working modes;
3. Built-in TCP/IP protocol stack, you can configure a socket;
4. Support standard TCP/UDP Server and Client;
5. Serial port baud rate support: 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps;
6. Serial port data bits: 5/6/7/8 bits;
7. Serial port parity check: none;
8. Serial port stop bit: 1/2 bit;
9. Standard Arduino UNO, Mega pin spacing;
10. Lead out Arduino Pin 2/3/4/5/6/7/8/9/10/11/12/13;
11. Lead ESP8266 GPIO 0/2/4/5/9/10/12/13/14/15/16/ADC/EN/UART TX/UART RX;
12. RESET reset;
13. KEY button multiplexing configuration function;
14. Two-position DIP switch realizes Arduino and ESP8266 serial port expansion switch;
15. WiFi working current: continuous sending: ≈70mA (200mA MAX), standby: <200uA;
16. Wireless transmission rate: 110-460800bps;
17. Working temperature: -40℃~+125℃   Package List:
1x WiFi Shield expansion board
  Payment
  • We accept PayPal only. But we only Accept your Ebay Address ,Please Make sure it's 100% right.
  • Payment must be received in 5 business days of auction closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping

Fill your shipping info

Refund
  • All package need to wait 30 days (US only n eed 7-10 days) ,Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

  • Condition: Nuevo
  • select: White Board
  • Brand: Unbranded
  • Series: ESP-13
  • Type: WiFi Shield Expansion Board
  • Kit Name: WiFi Shield Expansion Board
  • Country/Region of Manufacture: China
  • Marke: Markenlos

PicClick Insights - Placa módulo de expansión escudo WiFi ESP-13 ESP8266 sever web serie 802.11 b/g/n PicClick Exclusivo

  •  Popularidad - 0 seguidores, 0.0 nuevos seguidores por día, 218 days for sale on eBay. 0 vendidos, 85 disponibles.
  •  Mejor Precio -
  •  Vendedor - 189.653+ artículos vendidos. 0.9% votos negativos. Gran vendedor con la regeneración positiva muy buena y sobre 50 calificaciones.

La Gente También Amó PicClick Exclusivo