Approximate Dimension:
Stegosaurus_0.8*0.96inch, 2*2.5cm
T-Rex_0.8*1inch, 2.1*2.6cm
Triceratops_0.7x0.9inch, 1.7*2.4cm
Parasaur _0.8*0.96inch, 2*2.5cm
Brachiosaurus_0.8*1inch, 2.1*2.6cm
Giga dino_0.7x0.9inch, 1.7*2.4cm
Egg_1.2x1inch, 3.1cm
Mould color: clear
Finish: gloss (may require polish/glaze if need a shiniest/most glossy look)
Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit
Can be used with dishwasher/oven/refrigerator
Food grade, no BPA/PVC/phthalate
Wash and boil before use, especially for food
More Tips to use with Epoxy Resin:
1) Poured in silicone molds in layers, allowing air bubbles completely escape;
2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven.
3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.
4) Do not use water-base ink for resin casting.
5) After baking clay / resin in complex or deep molds release the finished product under running water with soap.
6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.
Item Specifics | |
---|---|
Brand | FUNSHOWCASE |
Model | 4787-4789 4793 4790-4793 |
Material | Silicone |
Type | Resin Moulds |
MPN | 4787-4789 4793 4790-4793 |
Occasion | Birthday, Christmas, Theme party |
Theme | Animal |
Shape | Dinosaur |
We will send order out upon receive payment in 1 business day.
ShippingFor UK orders, delivery usually takes around 2 WEEKS .
For other countries delivery time is varied, US AU CA orders are usually in 2 WEEKS. European Union Countries exclude UK usually be in 3 WEEKS. For other most part of the world delivery time is based on the flight availability, usually will be in 2-6 WEEKS.
For express service of all the world usually will be in a week .
We accept return in 30 days.
Contact UsIf not receive on time or other types of question, please contact us visa ebay message. We will be of assistance.
Shop Category Store Home
Crafting/Sugarcraft/CakeDecor ◈ CakeTopper ◈ Fondant Silicone Mould ◈ Bakeware ◈ Resin Casting Mould ◈ CakeLace ◈ Craft/SugarcraftTools
PartySupplies ◈ Anniversaries&Birthdays ◈ Figurines ◈ Wedding ◈ Backdrops ◈ Toys/Favours ◈ Others
EndingSoon
Remote Control
Other Hot Item
|
Dinosaur Resin Moulds Jurassic Egg Embryo Epoxy Jewelry Casting Supplies Set
Approximate Dimension: Stegosaurus_0.8*0.96inch, 2*2.5cm T-Rex_0.8*1inch, 2.1*2.6cm Triceratops_0.7x0.9inch, 1.7*2.4cm Parasaur _0.8*0.96inch, 2*2.5cm Brachiosaurus_0.8*1inch, 2.1*2.6cm Giga dino_0.7x0.9inch, 1.7*2.4cm Egg_1.2x1inch, 3.1cm Mould color: clear Finish: gloss (may require polish/glaze if need a shiniest/most glossy look) Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit Can be used with dishwasher/oven/refrigerator Food grade, no BPA/PVC/phthalate Wash and boil before use, especially for food More Tips to use with Epoxy Resin: 1) Poured in silicone molds in layers, allowing air bubbles completely escape; 2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven. 3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard. 4) Do not use water-base ink for resin casting. 5) After baking clay / resin in complex or deep molds release the finished product under running water with soap. 6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release. We will send order out upon receive payment in 1 business day. ShippingFor UK orders, delivery usually takes around 2 WEEKS . We accept return in 30 days. Contact UsIf not receive on time or other types of question, please contact us visa ebay message. We will be of assistance. All rights reserved. |