HappyModel BNF Moblite6 1S 75mm Brushless Analog Whoop - SPI Frsky RTF Ultimate Whoop Experience: The HappyModel BNF Moblite6 and Moblite7 are designed to deliver the ultimate whoop experience. With their 1S 75mm brushless setup, these tiny drones offer exceptional power and agility, making indoor and outdoor flying a blast. Ready-to-Fly (RTF) Convenience: Both the Moblite6 and Moblite7 come as Bind-and-Fly (BNF) models, pre-configured with SPI Frsky receivers, saving you time and effort during setup. Simply bind your transmitter, and you're ready to explore the skies in no time. Small Size, Big Performance: Despite their compact size, the Moblite6 and Moblite7 pack a punch in terms of performance. Their brushless motors and high-quality electronics ensure a stable flight and precise control, allowing you to perform impressive acrobatics with ease. Durable and Crash-Resistant: Built to withstand crashes and tumbles, these whoops are constructed with durable materials, including protective frames and propeller guards. Enjoy worry-free flying sessions, knowing your drone is resilient enough to handle occasional mishaps. Versatile FPV Fun: Whether you're an FPV beginner or an experienced pilot, the Moblite caters to all skill levels. Their analog FPV system provides real-time video feedback, allowing for thrilling FPV flights and immersive racing experiences, all while enjoying a crystal-clear view through compatible goggles. The lightest 1s 65mm brushless whoopPowerful and efficiency lightest 1s AIO 5IN1 F4 flight controller new Unibell EX0802 brushless motorsVTX power switchable 25mw~200mwLow profile Canopy design Specifications: Brand Name: Happymodel Item Name: Moblite6 1S 65mm ultra-light brushless whoop Wheelbase: 65mm Size: 80mm*80mm*25mm Weight: 18.5g (without battery) Motor EX0802 19000KV Motors Specifications: Configuration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm Weight(g):1.7g No.of Cells(Lipo):1S only Flight Controller Specifications: (Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4F MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Original whoop size compatible Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC Onboard 4-in-1 ESC Specifications: MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_50_REV16_8.HEX Default protocol: DSHOT600 Onboard Frsky SPI D8 Receiver Version Specifications: SPI BUS receiver Frsky D8 compatible Compatible Non-EU transmitter D8 model Channels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m Onboard 5.8GHz VTX Specifications: Output power: 25mw~200mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels(include Race band) Smart audio ready Runcam Nano 4 Lite Specifications: Model: RunCam Nano4 Lite Image Sensor: 1/3" CMOS Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 160° Signal System: PAL/NTSC Non-Switchable S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 170mA@5V 180mA@3.3V Housing Material: ABS Net Weight: 1.0g Dimensions: L14mm*W12mm*H9mm Package Contents: 1 x 65mm Frame (Mobula6 frame) 1 x Option1: DiamondF4 FR built-in SPI Frsky receiver 4 x EX0802 KV19000 Unibell brushless motor 1 x Gemfan 1219 31mm propeller(4cw+4ccw) 1 x Runcam Nano4 Lite 1 x Built-in 5.8G 40ch 25mw-200mw VTX 1 x 1S USB charger 1 x Propeller disassemble tool 1 x Screwdriver 1 x Happymodel Carry case

HappyModel BNF Moblite6 1S 75mm Brushless Analog Whoop - SPI Frsky RTF

Ultimate Whoop Experience: The HappyModel BNF Moblite6 and Moblite7 are designed to deliver the ultimate whoop experience. With their 1S 75mm brushless setup, these tiny drones offer exceptional power and agility, making indoor and outdoor flying a blast.

Ready-to-Fly (RTF) Convenience: Both the Moblite6 and Moblite7 come as Bind-and-Fly (BNF) models, pre-configured with SPI Frsky receivers, saving you time and effort during setup. Simply bind your transmitter, and you're ready to explore the skies in no time.

Small Size, Big Performance: Despite their compact size, the Moblite6 and Moblite7 pack a punch in terms of performance. Their brushless motors and high-quality electronics ensure a stable flight and precise control, allowing you to perform impressive acrobatics with ease.

Durable and Crash-Resistant: Built to withstand crashes and tumbles, these whoops are constructed with durable materials, including protective frames and propeller guards. Enjoy worry-free flying sessions, knowing your drone is resilient enough to handle occasional mishaps.

Versatile FPV Fun: Whether you're an FPV beginner or an experienced pilot, the Moblite caters to all skill levels. Their analog FPV system provides real-time video feedback, allowing for thrilling FPV flights and immersive racing experiences, all while enjoying a crystal-clear view through compatible goggles.

The lightest 1s 65mm brushless whoopPowerful and efficiency lightest 1s AIO 5IN1 F4 flight controller new Unibell EX0802 brushless motorsVTX power switchable 25mw~200mwLow profile Canopy design Specifications:

• Brand Name: Happymodel
• Item Name: Moblite6 1S 65mm ultra-light brushless whoop
• Wheelbase: 65mm
• Size: 80mm*80mm*25mm
• Weight: 18.5g (without battery)
• Motor

EX0802 19000KV Motors Specifications:

• Configuration:9N12P
• Stator Diamter:8mm
• Stator Length:2mm
• Shaft Diameter:Φ1mm
• Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
• Weight(g):1.7g
• No.of Cells(Lipo):1S only

Flight Controller Specifications:

• (Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4F
• MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: MPU-6000(SPI connection)
• Original whoop size compatible
• Power supply: 1S battery input (DC 2.9V-4.35V)
• Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
• Built-in Betaflight OSD(SPI Control)
• Built-in 5.8G VTX
• Built-in SPI Frsky/Flysky receiver
• Built-in 5V 1A BEC

Onboard 4-in-1 ESC Specifications:

• MCU upgraded to EFM8BB21
• Power supply: 1S LiPo/LiPo HV
• Current: 5A continuous peak 6A (3 seconds)
• Support BLHeliSuite programmable
• Factory firmware: O_H_50_REV16_8.HEX
• Default protocol: DSHOT600

Onboard Frsky SPI D8 Receiver Version Specifications:

• SPI BUS receiver Frsky D8 compatible
• Compatible Non-EU transmitter D8 model
• Channels: 8ch
• Failsafe support
• No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m

Onboard 5.8GHz VTX Specifications:

• Output power: 25mw~200mw switchable
• Frequency: 40CH
• Input voltage: 3.3V 5.5V
• Current consumption: 300mA(type)
• Frequency: 5.8GHz 5bands 40 channels(include Race band)
• Smart audio ready

Runcam Nano 4 Lite Specifications:

• Model: RunCam Nano4 Lite
• Image Sensor: 1/3" CMOS
• Horizontal Resolution: 800TVL
• Lens : 2.1mm(M8) FOV 160°
• Signal System: PAL/NTSC Non-Switchable
• S/N Ratio: >50dB
• Electronic Shutter Speed: Auto
• Auto Gain Control (AGC): Auto
• Min. Illumination: 0.01Lux@1.2F
• D-WDR: Auto
• Day/Night: Color
• Power:DC 3-5.5V
• Current: 170mA@5V 180mA@3.3V
• Housing Material: ABS
• Net Weight: 1.0g
• Dimensions: L14mm*W12mm*H9mm

Package Contents:

• 1 x 65mm Frame (Mobula6 frame)
• 1 x Option1: DiamondF4 FR built-in SPI Frsky receiver
• 4 x EX0802 KV19000 Unibell brushless motor
• 1 x Gemfan 1219 31mm propeller(4cw+4ccw)
• 1 x Runcam Nano4 Lite
• 1 x Built-in 5.8G 40ch 25mw-200mw VTX
• 1 x 1S USB charger
• 1 x Propeller disassemble tool
• 1 x Screwdriver
• 1 x Happymodel Carry case

× × × × × × × ×

---

Buy now and save! Tell a friend Visit store Watch now

Postage info

USPS First Class -

---

USPS Priority Mail Flat Rate Envelope - $7.99

---

FedEx Standard Overnight - $29.99

---

USPS First Class Mail Intl / First Class Package Intl Service - $0.00 Click the Postage tab above the listing description for more info

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYING VIA PAYPAL

We accept PayPal on our all our items so you can shop with confidence.

Simple choose the PayPal option when proceeding through the checkout.

Additional Information

No additional information at this time

Ask seller a question

Contact

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© SpeedyFPV

Postage

Click the Postage tab above the listing description for more info

Payment

Accepted Payment Methods

• PayPal

Returns

Returns are accepted

Items must be returned within 30 days of the auction ending

Seller will pay for return shipping.

eBay integration by

• Condition: Nuevo
• Brand: HappyModel
• UPC: 647625111836

Ver Más