Ferrocarriles grandes tolva del distrito de Snailbeach OO9/009 x 3 Dundas estrechos Peco

EUR 28,30 ¡Cómpralo ya! o Mejor oferta, EUR 13,43 Envío, Garantía al cliente de eBay
Vendedor: nigel_brooks ✉️ (3.865) 100%, Ubicación del artículo: Colchester, GB, Realiza envíos a: WORLDWIDE, Número de artículo: 266232552164 Ferrocarriles grandes tolva del distrito de Snailbeach OO9/009 x 3 Dundas estrechos Peco. COUPLINGS: The wagons have an NEM socket, so you can fit your own types, but my OO9 hook and fixed loop couplings are supplied attached inside the wagon (1 spare set), just apply gentle sideways pressure to snap off. 3 off Snailbeach District Railways Large Hopper Wagons Narrow Gauge in high quality 3D Resin for 4mm scale / 9mm track - OO9 HOE £19.99 per set of 3 + 2nd Class postage per order. OR order 2 or more sets, and get 10% off making £17.99 per set. These match well with the Dundas DM06 + Peco GR-34 Please check all the photos, and read the text below to know what you are receiving.There are no instructions with the kit , so refer to notes below ! There is a quick video Rotation video – sand and grey Dimensions: height from rail top: 23mm, width: 23mm, length (ex couplings): 36mm Parts, supplied UNPAINTED: 3 - Wagon Bodies/Chassis with detailed axle boxes, brakes, chain and other fine details 3 - Coupling sets – 4 per wagon to give spares + '3-link' couplings 3 - pairs of Kato solid metal wheels/axles, normally pre-fitted to the chassis Photos show all the parts supplied, along with some painted versions - the painted ones are prototypes, and may have minor differences. COUPLINGS: The wagons have an NEM socket, so you can fit your own types, but my OO9 hook and fixed loop couplings are supplied attached inside the wagon (1 spare set), just apply gentle sideways pressure to snap off. Also supplied are 1 or 2 ‘3 link chain’ resin prints per wagon. These couple the wagons using the small pin above the NEM slot. TAKE CARE: When handling the chain/brake can be a bit delicate (especially if emoving/replacing wheels). Once painted, apply PVA/varnish over the chains to give more robustness. WHEELS: If removing/replacing wheel-sets, do this very carefully, using pliers to hold the axles, and only apply gentle pressure to the axle boxes. The 3D resin is not as flexible or forgiving as injection moulded plastic. Due to tolerances/variations in the printing process, the couplings may be slightly loose, or rather tight. Loose will just require some glue or packing, if tight, ensure all the sprues/bumps are fully removed (a fingernail usually does the trick), you can also lubricate with an HB pencil (as the resin is naturally rough), but some might require gentle filing/sanding to ensure a good fit. Use super glue or PVA - solvent glues do not work on 3D resins. The NEM style pockets and couplings are a little delicate, so take care, they will not stand up to repeated insertion and removal. Each wagon comes with spares, in case of breakage. WEIGHTING: The metal wheel-sets give the wagons a reasonable amount of weight. You can of course add weight as the load, but better to add a small lead strip under the chassis, between the axles, to give a low centre of gravity. CAREFUL: All 3D models can be a little delicate, so don't drop them on the floor ! Also, I recommend any work be done with a file/sandpaper or min-drill rather than trying to cut, as this is gentler. I cannot be held responsible for breakage during handling, but if they are damaged in the post, then please provide photographic evidence of packaging etc. Any breakage can normally be fixed with a spot of super-glue or PVA. The parts are printed in high-resolution resin, I generally print in white, although this doesn’t photograph well, it paints very well (colour you receive may vary). All prints have been cleaned and cured thoroughly, but as with all 3D prints, there may be small blemishes to tidy up. STOCK: I hold a small stock, so will normally dispatch next working day (or even same day if early enough), but at times there may be a delay if I have to make parts to order. I will advise you when the order is received of any delay, otherwise I aim to dispatch with 2 working days. Full list of items available via eBay ... Locos: OO9 Glyn Steam Tram Loco OO9 Bagnall Contractors Quarry Loco OO9 Baguley Drewry RNAD Diesel OO9 Steam Tram 'Toby' B11-109SC Adapter Including Compatible Chassis for KATO 11-109 B11-109SA Adapter Excluding Compatible Chassis for KATO 11-109 Dummy-109 Chassis KATO 11-109 Chassis TU-KOPPEL 0-4-0 Chassis Rolling stock: 3 off Corris Slate Slab Trestle Wagons 3 off Ffestiniog 2 Ton Flat Slab Wagons WLLR Closed Goods Van 3 off RAF Fauld Ammo Wagons GVT Guard’s Van 3 off Ffestiniog 3 Ton Slate Wagons 3 off GVT 4 Ton Granite/Mineral Wagons 6 off Talyllyn 2 Bar Slate Wagons / 3 off Talyllyn 2 Bar Slate Wagons 6 off Penrhyn Wagons 6 off Tipper Wagons / 3 off Tipper Wagons Pair (2) Cattle Wagons/Vans 6 off Ffestiniog 2 Ton Slate Wagons / 3 off Ffestiniog 2T Slate Wagons 7mm Narrow Gauge / O-16.5 3 off 7mm Tipper Wagons 3 off 7mm Ffestiniog 2 Ton Braked Slate Wagons Lastly, I am always interested in hearing back from people both the existing range, and suggestions for what to work on next. Thank you Nigel
  • Condition: Nuevo
  • Brand: Brooks 3D Models
  • Assembly Status: Unassembled Kit
  • Type: Hopper Wagons
  • Era: Era 3 - The Big Four (1923-1947)
  • Corporate Livery: Snailbeach District Railways
  • Material: Resin
  • Scale: 1:76
  • Features: Not Painted
  • Gauge: OO9

PicClick Insights - Ferrocarriles grandes tolva del distrito de Snailbeach OO9/009 x 3 Dundas estrechos Peco PicClick Exclusivo

  •  Popularidad - 49 seguidores, 0.1 nuevos seguidores por día, 330 days for sale on eBay. Gran cantidad en seguimiento. 29 vendidos, 4 disponibles.
  •  Mejor Precio -
  •  Vendedor - 3.865+ artículos vendidos. 0% votos negativos. Gran vendedor con la regeneración positiva muy buena y sobre 50 calificaciones.

La Gente También Amó PicClick Exclusivo