50 anillos de tubo Skywatcher Evoguide (ahora con opciones de fijación modular)

EUR 42,37 ¡Cómpralo ya!, EUR 30,78 Envío, Garantía al cliente de eBay
Vendedor: craftology3d ✉️ (958) 100%, Ubicación del artículo: Bristol, GB, Realiza envíos a: WORLDWIDE, Número de artículo: 234096897132 50 anillos de tubo Skywatcher Evoguide (ahora con opciones de fijación modular). UPDATE: For UK residents, I have added an additional  paid postal service with DPD. If you would prefer to pay extra and have your mount delivered  by DPD please select this option otherwise Evri will be used which is free of charge. Having used the Evoguide 50 for over a year and swapping it between my different rigs, I wanted an easier way to move the scope but leave the mounting system on the rig especially when moving from a Vixen system to a finder scope system. There wasn't much on the market for the Evoguide 50 so I decided to design my own tube mounting system for the Evoguide 50. This mount holds the scope more securely than the standard mounting system and you can easily take the scope out and leave the mounting system in place. Even though this is a 3d printed mount it has minimal flexure and holds the guide scope securely. These mounting systems are 3d printed using PETG filament which is resistant to heat and moisture.  I use brass threaded inserts which are hot melted into position which will last longer than 3d printed threads. I also melt into position brass bushings to add extra protection to the main ring clamp bolt holes. The clamping bolts used are M6 with 3d printed tops to create easy to use thumb screws. The base bolts are also M6 and the hinge bolts are M3. All of which are included. Due to lots of requests I have created a modular mounting system so that different top brackets can be applied:
  • Finder shoe mount: This will fit the standard finder shoe on most telescopes, the tube rings base is resized so that they fit the finder shoe bracket perfectly.
  • Vixen mount: This has the standard Vixen style dovetail bar, the tube rings base is resized so that they fit the dovetail bar perfectly.
New Modular Options
  • NEW - Finder  mount with Finder Scope top bracket: Recently requested version has a finder scope bottom section but with the top section which allows for a Finder Scope clamp bracket to be fixed to the top. 
  • Vixen mount with Vixen top bracket: This has the same bottom section as the standard Vixen mount but now has a top section which allows for a Vixen clamp bracket to be fixed to the top. The Vixen top bracket can also be purchased separately. 
  • Vixen mount with Finder Scope top bracket: This is the same as the Vixen mount above but now has a top section which allows for a Finder Scope clamp bracket to be fixed to the top. The Finder Scope top bracket can also be purchased separately . 
  • Vixen mount with Bracing top bracket:  This is the same as the Vixen mounts above but the top section has a bracing bar instead of a Vixen or Finder scope clamp. This is useful for when you do not want to mount any other scopes on top of the Evoguide 50 but would still like the extra rigidity.  This is version of the mount is compatible with the Vixen or Finder Scope top brackets which can also be purchased  separately  or at a later date.
  • Double Finder Scope bracket which will fit a Vixen Clamp: This can be purchased separately or part as a whole bundle where you will get a discount.
  • Modular Upgrade Kit: If you have already purchased a set of the original tube rings and would like to go modular, this kit will allow you to replace the top tube rings and select your top bracket of choice.
  • Modular Tube Ring Tops Only:  This option is for those who have already purchased a set of the original tube rings and would like to go modular but want to fit their own top brackets.
  • Rigel QuikFinder Bracket: This bracket is for the  Rigel Systems QuikFinder Compact Reflex Sight and will fit any finder shoe or the Double Finder Scope bracket.
  • Vixen and Finder Scope bottom Tube Rings: These are just the tube rings with no dovetail or top modular options. I can resize these rings to fit different size scopes.
There is an option drop down to select the mounting system you want and if you would like an additional bracket to add, if you would like a bracket that is not listed please let me know, all fixture bolts are included as well. I can print these in several colours: Black, White, Silver, Blue, Orange, Green, Red and Yellow. I can also mix the colours for the different components but please send me a message to tell me which colours your would like. If you would like a different colour let me know and I will look to source the colour. If you are looking for a Dew Shield or Bahtinov mask for the Evoguide 50, I have a separate listing offering those, so check out my other listings in my store. Please feel free to contact me if you have any questions. Delivery Information and Postage Policies Free UK postage sent  Royal Mail  2nd class large letter signed or Hermes tracked depending on what setup is ordered as some items will not fit through the letter box, these will all be insured for the total cost of the item that is ordered. Craftology3D cannot be held responsible for items not arriving by Royal Mail or Hermes, we do get a proof of postage with every order. Please message us first to tell us that your item has not arrived before opening a case. If your item has not arrived after 7 days then we will send you another item free of charge. Delivery dates are provided by Ebay and not Craftology3D, these are estimated dates as most items take a few days to print. Leaving Feedback We would be grateful for all positive feedback or  suggestions on how we can improve our products, we are also happy to  receive  requests and suggestions for new items.  If you do have an issue please contact us first to allow us to fix the issue before leaving us negative feedback. The photos show the finder scope mounting system being used on one one my rigs and one of my customers (Esprit 120) showing the Vixen mounting system being used. NOTE: Only the Evoguide 50 3d printed mount is for sale. The Evoguide 50, Telescopes, Auto Focusers, Guide Cameras, Main Cameras, Filter Wheels etc in the photos are not part of this sale. All designs have been created by Craftolgoy3D
  • Condition: Nuevo
  • Mounting Type: Finder Shoe Mount
  • Additional Bracket: None
  • Compatible Brand: For Sky-Watcher
  • Brand: Unbranded
  • Type: Cradle
  • Compatible Series: Evoguide 50
  • Material: PETG
  • Features: Waterproof
  • Country/Region of Manufacture: United Kingdom
  • To Fit: Newtonian, Catadioptric, Reflector, Refractor
  • Item Weight: 111g - 131g

PicClick Insights - 50 anillos de tubo Skywatcher Evoguide (ahora con opciones de fijación modular) PicClick Exclusivo

  •  Popularidad - 48 seguidores, 0.0 nuevos seguidores por día, 983 days for sale on eBay. Gran cantidad en seguimiento. 3 vendidos, 2 disponibles.
  •  Mejor Precio -
  •  Vendedor - 958+ artículos vendidos. 0% votos negativos. Gran vendedor con la regeneración positiva muy buena y sobre 50 calificaciones.

La Gente También Amó PicClick Exclusivo